Curved Magnetic Jig Number Letter Stamp Punch Guide 10-13mm Vin Chassis Restore
$ 20.39
Description
Curved Magnetic Jig Aligner For Number and Letter Stamping with shank from 10 to 13mm Perfect for classic vehicle restoration For Motorcycle frame BSA Honda Norton KTM Yamaha Ducati BMW Kawasaki MV Agusta. If you need a shorter version, check my listing for Headstock Jig. Suitable For Pipes 2 1/2" circa in diameter (64mm) This is a kit to let you Punch in a straight line on pipes! Has 2 magnets to hold it in place For Number and Letter Stamp with shank from 10 to 13mm (normally for characters between 7mm and 12mm). The pitch (distance between center of letters) is 7mm circa. Allows you to impress up to 127mm long sentences. Perfect for Imprinting on Metal, thanks to the magnets. Suitable for Frame VIN numbers replacement. Used for motorcycle restoration - for VIN Stamping. This has been used with success on replaced chassis for restoration of classic cars and motorbike, thanks to the magnets it facilitates holding it in place. Check my other listing for more sizes. It allows you to Mount punch stamps of different sizes thanks to its adjustable design. This is designed and made by myself in England; listing include one stamp jig in black reinforced plastic, no stamps or other item included. Recommendation on use: do some trial tests on a test surface to familiarize yourself with the methods. The magnets are there to simplify the location on the parts. I do recommend to lock the jig via zip ties, tape or via a clamp, to hold it in place firmly. suggestion is to mark with a pencil the hedge of the jig in case of unwanted movement. Trust my feedback and check my other listings
