GA12-N20 310RPM Speed Reduction Motor 3mm D-Shaft Dia Gear Motor for DIY RCCars
$ 2.87
Description
GA12-N20 310RPM Speed Reduction Motor 3mm D-Shaft Dia Gear Motor for DIY RCCars Features: The N20 motor is characterized by its small size and large torque, which is suitable for making micro-control robots, for example, with high sensitivity and easy driving. The whole body is metal, from the gear to the reduction box. This motor is a second-hand dismantling motor. The condition is relatively new. have grooves and do not. The body number has several numbers, and the basic parameters are the same. Most of them have welding wires, and a small amount of welding wires may be broken. The welding wires are relatively simple and do not affect the use. After all, it is a second-hand disassembled motor, and there will be a small amount of defects. It is the default when it is photographed. motors are equipped with rubber rings, which can be used as isolation rings. Just remove them if they are not needed. Specifications: Overall size: length 24 width 12 height 10mm Motor shaft diameter: 3mm D-Shaft Motor shaft length: 9.5mm Wire length: 15-22cm 3-9V Motor parameters: 3V 185 5V310 turn (The speed is a rough test, subject to the actual measurement of the customer) Package Includes: 1X Motor note: Please allow 1-2cm errors due to manual measurement, make sure that you do not mind before you order. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
