Parasond Zonemaster Model 250 -- Universal 2 Channel & Sub Amp -- Home Theater-image
Parasond Zonemaster Model 250 -- Universal 2 Channel & Sub Amp -- Home Theater-image
Parasond Zonemaster Model 250 -- Universal 2 Channel & Sub Amp -- Home Theater-image

Parasond Zonemaster Model 250 -- Universal 2 Channel & Sub Amp -- Home Theater

$ 20.59

Model: 250 Type: Power Amplifier Brand: Parasound

Description

Description Features Our ZoneMaster models are very similar in their feature sets, differing mainly in size and number of channels. Universal amplifier for applications from 50 to 200 watts 4 speaker connections (A and B outputs for both channels) High current for stable operation at 2 Ohms Channel pairs are bridgeable for up to 200 watts @ 4 Ohms Class AB input stage plus premium Class D power stage One Independent audio sensing trigger One Independent 12 volt trigger input Looping 12 volt trigger output for one zone Speaker level input for expanding systems w/out pre out jacks One bus input can be routed to any zone Looping output to connect additional amplifiers Mono mode combines L and R for single speaker applications Separate level controls for both channels Detachable speaker connectors accept up to 12 gauge wire Short circuit and overheat protection with front panel indicators 0.5 watt standby power consumption meets Energy Star & EU specs ZoneMaster 250 Specific Features Compact 1u, 1/2 width chassis size Rack mount kit sold separately (click to view) Full Range Mono RCA Output 80Hz low pass Mono RCA output (for sub) Built in 80Hz low pass filter in bridged mode for driving in-wall/in-ceiling woofers or passive sub(s) Specifications Power Output RMS, All Channels Driven (20 Hz - 20 kHz) 50 watts x 2 @ 8Ω 90 watts x 2 @ 4Ω or 2Ω 160 watts x 1 @ 8Ω (Bridged) 200 watts x 1 @ 4Ω (Bridged) Frequency Response 10 Hz - 60 kHz, +0/-3 dB Total Harmonic Distortion < 0.05% at typical listening levels < 1.0% at full power Interchannel Crosstalk 70 dB at 20 kHz Input Sensitivity: 700mv = Full output (50 Watts @ 8 Ω) Total Gain = 29 dB (Level controls set to Maximum) S/N Ratio > 112 dB, input shorted, IHF A-weighted DC Trigger Requirements +9 Vdc to +12 Vdc, 2 mA Audio Trigger Requirements 2 mV Audio Signal AC Power Requirement: 250 Watts Maximum 15 Watts Typical 7.5 Watts Idle 0.5 Watts Standby 110-130 VAC 60 Hz or 220-255 VAC 50 Hz Note: AC mains voltage is set only by qualified electronics technician. Dimensions: Width: 8.5" (220 mm) Depth: 10" (254 mm) Height, with feet: 2" (51 mm) Height, without feet: 1.75" (45 mm), 1U Weight: Net: 4.0 lbs (1.8kg) Shipping: 7 lbs (3.1kg)

  1. Amp received in excellent cosmetic condition, and works perfectly.

    an1s1a706a66

  2. idk if legit or not but order was cancelled

    Tristan Dietz

  3. Order delivered on time with no issues

    shanepilon71

Related products