Description
8L Recirculating Water Bath from IVYX Scientific This 8 Liters (2 Gallons) versatile, simple to use laboratory water bath is able to quickly and precisely keep samples and experiments at the correct temperature, from room temperature to 100°C in 0.1°C increments. The built in timer allows continuous operation for up to 24 hours. An internal pump continuously recirculates the water, ensuring a uniform, precise temperature of +/- 0.3°C of the set temperature Water from the vessel flows through a small hole at the bottom of the water bath, where it is pumped internally around and up to the side of the vessel. This continuous mixing of water ensures a uniform, precise temperature throughout the water bath. NOTE: To protect the internal pumping mechanism and tubing against extreme heating, the pump automatically shuts off when the temperature reaches 85°C, stopping the water cycling. Large 8L Capacity The large internal chamber has a volume of 8 Liters (2 Gallons), with dimensions of 11x8.5x5.5 in. Simple controls with a 24hr timer Set the desired temperature and time with simple, easy to use controls. A backlit LCD screen clearly displays the current temperature, time, and pump operation. Stainless Steel Body The exterior is constructed of stainless steel. The inner water vessel is made of tough polypropylene, while the heating plate is made of an aluminium alloy with Teflon coating. Max Volume 8 Liters / 2.11 Gallons Temperature range Room Temperature to 100°C (210°F), in 0.1°C increments Temperature control +/- 0.3°C Temperature Control System ACT (Active Control Thermostat) System, Recirculating Water Cycling Rated Power 800 Watts Timer 0-24 hours External Dimensions 15x10x9 in (with cover) Internal vessel dimensions 11x8.5x5.5 in Display Backlit LCD Screen External Body Material Stainless Steel Water Vessel Material Polypropylene Heating Plate Material Aluminium alloy with Teflon coating Features & details PRECISE HEATING: Recirculating pump cycles the water to keep it within 0.3°C of set temperature POWERFUL: 800 Watts heater quickly heats up the water PROGRAMMABLE: Timer is programmable from 0 to 24 hours EASY TO USE AND READ: Heats up to 100°C in 0.1°C increments. Digital display clearly shows the current temperature NOTE: This water bath can only be run continuously for 24 hours at most for safety reasons. After that time the settings need to be reset.