Tamiya 1/10 Electric RC Assembly Kit Toyota TUNDRA High Lift (58415)
$ 174.24
Description
■■■Product■■■ Tamiya 1/10 Electric RC Assembly Kit Toyota TUNDRA High Lift (58415) 【condition】: NEW [Product Introduction] This is an electric RC car that reproduces the second-generation model of the TUNDRA, a full-size pickup truck sold by Toyota in the United States. [Realistic reproduction RC that can also be customized] Tundra, a full-size pickup truck sold by Toyota in the United States. This is an assembly kit for an electric radio control car that reproduces the double cab type of the second-generation model that debuted in 2007. It uses a ladder frame similar to the actual car and adopts a shaft drive 4WD equipped with an assembled 3-speed transmission. The fun of assembling it with many metal parts such as the ladder frame, leaf springs, and friction dampers is also exceptional. The precisely reproduced polystyrene resin body is equipped with large diameter tires and has a high lift, which is very impressive. In addition to the aero type roll bar and grill guard, the carrier to be attached to the roof and two snowboards are also parts. You can enjoy lighting up the lights by installing separately sold LEDs. Front guard equipped with aluminum skid plate and large lamps as standard. Enhances the heavy-duty mood. Road lamps can be attached to the plated roll bar. Of course, you can also install and light up the separately sold LEDs. Side mirrors made of soft resin that won't break even if it falls over. The mirror surface has a two-part structure like the real car. 6-spoke beadlock type wheels are fitted with big tires with a diameter of 94 mm. The front and rear differential case covers are plated parts, enhancing the custom mood. A dual-exhaust muffler is made under the rear bumper. The muffler end is made of metal. In addition, the turn signals, backlights, and brake lights can be installed with separately sold LEDs. [A heavy-duty 4WD chassis with many metal parts] The differential, which uses high-strength metal gears, can be locked. This improves off-road performance. The 3-speed transmission, which emphasizes low-speed driving, allows you to enjoy gear changes while driving, and comes standard with a slipper clutch to protect the gears. [Product Specifications] 1/10 scale Electric RC assembly kit Overall length 500mm, overall width 216mm, overall height 238mm Vehicle weight approx. 3.1kg Tread F/R = 179mm Wheelbase = 310mm Motor = RS540 type Drive system = Vertical motor shaft drive 4WD Differential gear system F/R = 3 bevel differential Damper = Front and rear friction Gear ratio = Low 1: 64.39 Second 1: 35.20 Top 1: 21.14 Controller = ESC specification [Items to be purchased separately 】 RC mechanism: Futaba Attack 4WD radio (T4VWD) Battery: Tamiya 7.2V racing pack or various 7.2V advanced packs 8 AA batteries for transmitter *Notes about the radio The transmitter of the Futaba 4ch radio set "ATTACK-4WD (T4GWD)" released in mid-August 2007 uses a click-touch type trim adjustment, which causes problems when controlling Tamiya's "DMD unit" or "multifunction unit". All functions can be operated, but trim adjustment takes time when switching (special operations). We recommend the Futaba radio "ATTACK-4WD (T4VWD)".
