Description
This piggyback float switch controls your pump and is wired for emptying operations. - Directly Controls pumps up to 1/2 HP at 120 Volts or 220 Volts - Up to 12 Amperes continuous or 13.3 Non continuous AC Amperage - 12 VDC motor loads up to 13.3 Amps. us for other DC Applications - Environmental friendly (Mercury Free) - suitable for use in septic, sump, and potable water applications - Built with a Honeywell Micro switch, for 100,000 operations - Cable is Coated with PVC / Thermoplastic jacket - Internally Contains a Stainless Steel Ball - Includes adjustable counterweight. - Manufactured in Argentina - year - Constructed with non-polypropylene - Float dimensions are 4.1 in x 3 in x 1.6 in (105 x 78 x 41 mm) - for indoor or outdoor use: operating temperatures 32 to 140F (0 to 60C) - CE Marked, IP68 , tested to IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001) - Reinforced Double O Ring Cable Entry Review online instructions at docs.sumpalarm.com/Piggyback_Float_Instructions-r0116.pdf AUTOMATE WATER LEVEL CONTROL with the WaterBoss Float Switch for sump pumps, waste water tanks and septic pumps. Our tethered sump pump switch is a reliable alternative to a stem mounted float. UNIVERSAL WATER LEVEL SWITCH with piggyback plug supports direct connection to motors up to 1/2 horsepower or 13 amps at 120v AC. This is for non-continuous pump operations and emptying use only. 10-FOOT CABLE FLOAT SWITCH for water tanks and light to medium amounts of suspended solids is fully adjustable. The float reacts to liquid levels, shutting off the pump to prevent the motor burning up. RUGGEDLY BUILT with non-corrosive polypropylene casing, self-lubricating armature and a Honeywel microswitch for over 1 million cycles, WaterBoss Sump Pump Switch has received CE and IEC approvals. QUICK, EASY INSTALLATION and reliable, frustration-free water sensor monitoring make WaterBoss the ultimate water tank float switch. It comes with a 5-Year for your peace of mind.